Dongfeng 4×2 8-Ton Straight-Boom Truck Mounted Crane
This Dongfeng 4×2 truck-mounted crane combines a straight-boom lifting unit with a dropside cargo bed for construction-site deliveries and utility projects. The source lists an 8-tonne maximum lift, but usable load depends on boom radius, extension, outrigger setup and ground conditions. Confirm the load chart and vehicle specification for each project.
Product photographs
What this truck can do
Integrated lift and delivery
Source-listed 8,000 kg maximum lifting load
One truck can deliver compatible cargo and position it at the worksite.
The 8,000 kg figure is not available at every radius or boom extension; use the final load chart and stable outriggers.Reach for placement
Source-listed 16 m maximum radius and 17.5 m maximum height
These figures help screen whether a proposed placement is in the equipment class.
Maximum radius, height and load are separate ratings. Do not combine them into one guaranteed lift.Cargo bed with crane
Reference dropside bed 5400 × 2400 × 550 mm
Materials can travel on the same chassis as the lifting equipment.
The bed is listed as customizable; legal payload and tie-down arrangements need a signed vehicle drawing.How this configuration is used
The vehicle can carry compatible materials to a worksite and position them using its mounted crane. Plan both the lift and the road journey: the crane and outriggers reduce the weight available for cargo, while the lift chart changes with working radius and boom extension.
Before specifying a vehicle
Share the heaviest item, lifting radius, placement height, ground and access conditions, cargo dimensions, route, steering requirement and destination port. Request a signed load chart, weight calculation and chassis/body drawing before approving a configuration. The source listing does not establish local registration, certification, price, delivery time or after-sales terms.
Source and verification
Vehicle type, listed crane rating and selected equipment details were cross-checked against the product-center record and its images. Conflicting source dimensions and wheelbase values are deliberately omitted; final engineering documents remain necessary.
Where this configuration fits
Suitable routes and tasks
- Project sites with assessed ground bearing and suitable outrigger space
- Loads and working radii covered by the final signed crane load chart
- Road routes approved for the completed vehicle
Check before selecting
- Lifts without a signed load chart and site-specific lift plan
- Soft or unstable ground without engineered outrigger support
- Use beyond confirmed cargo, axle-load or local registration limits
Frequently asked questions
Does the listed 8-tonne rating apply at a 16 m radius?
No such combined rating is established by the source record. The 8,000 kg maximum lift and 16 m maximum radius are separate listed figures; request the signed load chart for the proposed radius, boom length and outrigger setup.
What cargo bed is shown for this configuration?
The source lists a 5400 × 2400 × 550 mm dropside bed as a customizable reference. Confirm usable space, cargo payload, tie-downs and final dimensions on the signed vehicle drawing.
What should be checked before planning a lift?
Provide the item weight, pick and placement radii, placement height, available outrigger space and ground conditions. The source record does not replace a site-specific lift plan or signed load chart.
Get a configuration matched to your route
Prepare your operating conditions and destination details for a quotation based on a confirmed technical specification.
Useful details to include
- Heaviest individual lift and cargo weight
- Pick and placement radii, height and available outrigger space
- Ground bearing and route conditions
- Cargo size and daily duty cycle
- Steering position, destination port and applicable registration requirements
Technical reference Product Specifications View full specifications Hide specifications
Source-listed figures are for configuration review. Confirm final values in the signed technical specification before ordering.
Chassis & Power
- Drive layout
- 4×2
- Engine model
- B6.2NS6B210
- Engine power
- 154
- kW
Dimensions & Weight
- Gross vehicle weight
- 18,000
- kg
Crane & Cargo Body
- Reference cargo-bed dimensions
- 5400 × 2400 × 550 (customizable)
- mm
- Crane model
- SQS200-5
Working System
- Crane type
- Straight boom
- Outrigger operation
- Hydraulic
Performance & Configuration
- Listed maximum lifting load
- 8,000
- kg
- Listed maximum lifting height
- 17.5
- m
- Listed maximum operation radius
- 16
- m
More Truck Mounted Crane
Isuzu 8×4 16-Ton Truck Mounted Crane
The Isuzu 8×4 16-Ton Truck Mounted Crane is intended for on-vehicle lifting and material handling. A truck-mounted crane lifts within its approved load chart and outrigger conditions. Verify the final capacity and equipment against the intended duty before ordering.
Read more
Shacman 8×4 25-Ton Truck Mounted Crane
The Shacman 8×4 25-Ton Truck Mounted Crane is intended for on-vehicle lifting and material handling. A truck-mounted crane lifts within its approved load chart and outrigger conditions. Verify the final capacity and equipment against the intended duty before ordering.
Read more
HOWO 8×4 14-Ton Truck Mounted Crane
The HOWO 8×4 14-Ton Truck Mounted Crane is intended for on-vehicle lifting and material handling. A truck-mounted crane lifts within its approved load chart and outrigger conditions. The listed capacity is 13 m³; usable capacity and legal loading depend on the final signed specification.
Read more
FAW 6×2 10-Ton Truck Mounted Crane
The FAW 6×2 10-Ton Truck Mounted Crane is intended for on-vehicle lifting and material handling. A truck-mounted crane lifts within its approved load chart and outrigger conditions. The listed capacity is 10 m³; usable capacity and legal loading depend on the final signed specification.
Read more